#Activepresenter delete sound track how to#
#Activepresenter delete sound track software#

Step 5 Select the color temperature of the lighting in the meeting room from the drop-down menu. The current color temperature setting is displayed.įigure 10-2 Color Temperature Test Screen Note Each display in the meeting room should be showing a set of horizontal grey bars and that display's relative position.

The Current Color Temperature test screen appears, as shown in Figure 10-2. Step 4 Click Start in the Testing box to start the adjustment process. Step 2 Choose Troubleshooting > Hardware Setup. Step 1 Log in to the Cisco TelePresence System Administration interface. Remember, the Color Temperature setting only effects how the local participants see the display, it does not effect the way the room looks to remote participants. Tip It is OK to try a few different color temperatures to see what looks best in the room. If you are unable to ascertain the type and color temperature of light bulbs in the meeting room, experiment with color temperature settings until the color and images on the display screen look lifelike. Tip In many cases, the color temperature is printed on the light bulb. The following temperatures can be selected for adjusting the image on the Cisco TelePresence display screens: This color temperature is sometimes expressed using terms such cool, warm, or daylight, but can be expressed more precisely in kelvins (K) as a numeric value. Each of these light sources, and the amount of light in terms of lumens or watts, produces a different color temperature. Sources of light in most rooms are produced by fluorescent fixtures or incandescent light bulbs that use tungsten filaments. When adjusting the images on the CTS display screens, you must take the color temperature of the ambient light in the room into consideration.

Related Information Selecting the Light Level.

Use the information in the following sections to adjust the display for your system: Note Each display must be adjusted individually.

Cisco TelePresence System 3200 Assembly, Use & Care, and Field Replacement Unit Guide Managing DisplaysĪ display is set up successfully when the color on the display has been adjusted for the lighting in the meeting room.

Cisco TelePresence System 3000 Assembly, Use & Care, and Field Replacement Unit Guide.

#Activepresenter delete sound track how to#

For information on how to configure CTS for the first time, see the following documentation: See the 'Testing Speakers' section.įigure 10-1 shows an example of the Cisco TelePresence System administration tools available to assist you with troubleshooting tasks.ĬTS initial setup is also performed using the Hardware Setup fields. Note You must test the speakers before testing the microphones because the microphone test depends on speakers that are functioning properly. If the displays are showing the correct images, you can proceed to testing the cameras, speakers, and microphones, as needed.

Verify that the displays work by using the Hardware Setup > Displays tests in this section.Ģ. All of the Cisco TelePresence System Administration interface Hardware Setup features require the use of the displays in the meeting room. You can manage and test the following Cisco TelePresence System components:īefore you begin testing and troubleshooting your system, check the system displays.

Where to Go Next Managing CTS 3000 and CTS 3200 Hardware Setup.

Proceed to the following sections to troubleshoot system components: Note You cannot perform diagnostics during an active Cisco TelePresence system call. Click Yes to accept all security connection messages. Enter the IP address in your laptop's browser window.Ĥ. – From the Cisco TelePresence Touch 12 tap the following:ģ. Note If you have more options on your phone, touch the more softkey until you reach the end of the selections. – From the CTS Cisco Unified IP phone touch the following softkeys: Obtain your IP address in one of the following ways:

#Activepresenter delete sound track software#

This chapter contains information about troubleshooting hardware and software on the following CTS devices:ġ. You may want to periodically test system components using the hardware and software tests available in the Cisco TelePresence System (CTS) Administration Troubleshooting window. Note Cisco announces the end-of-sale and end-of life dates for the Cisco TelePresence System 3000 and Cisco TelePresence System 3200. Troubleshooting the CTS 3000 and CTS 3200

Testing the External Presentation Display.

Testing the CTS 3000 and CTS 3200 Cameras.

Managing CTS 3000 and CTS 3200 Hardware Setup.